Locations | 1-888-477-2177

Support

Installing Your New Adtran 834-5 Dual Band Router

Remove your Adtran 834-5 Dual Band Router from the box. You should have:

  • Router
  • Power Adapter
  • Ethernet Cables


Connecting the Cables:

  1. Plug the power adapter into the back of the Adtran router and also into an electrical outlet. You should see a Power light.
  2. Plug the white/red Ethernet cable into the port on the Adtran router labelled WAN. The other end of this cable should go to an ethernet jack in the wall or directly to ETH 1 on the Fibre Optic modem. Typically, this modem will be mounted on a wall.
  3. Wired devices can be connected using an additional Ethernet cable plugged in to any one of the yellow LAN ports on the Adtran router unless the Adtran router is also being used for TV services.

If TV service is also configured on this router, use LAN Port 1 only for devices.

Pick Your Region

We ask so that we can provide accurate prices and information